Hi ?
My berlingo failed inspection due to an airbag light being illuminated.
Both the seat airbag and seatbelt pretensioner wires has been soldered instead of using the plugs.
I had Pp2000 read out the airbag module, and it has a permanent fault on left side colission/impact/crash sensor.
Tried 3 sensors now, on the location i know of on the left side (under left door), checking plugs and wires, wich looks perfect.
I went to check the airbag module in the car, and the 3 ground connections were corroded, so i cleaned them up, fault is still there.
Im lost for what Else it could be.
Any advice or ideas?
My berlingo failed inspection due to an airbag light being illuminated.
Both the seat airbag and seatbelt pretensioner wires has been soldered instead of using the plugs.
I had Pp2000 read out the airbag module, and it has a permanent fault on left side colission/impact/crash sensor.
Tried 3 sensors now, on the location i know of on the left side (under left door), checking plugs and wires, wich looks perfect.
I went to check the airbag module in the car, and the 3 ground connections were corroded, so i cleaned them up, fault is still there.
Im lost for what Else it could be.
Any advice or ideas?