projector headlights
has anyone fitted projector units into m59 headlights? id like to fit HID bulbs but dont want to spend all winter getting flashed by other road users? cheers
View ArticleMotor working, vipers not wiping, Berlingo 2005@155k
Hi. About a week ago, both window vipers stopped working simultaneously in the middle of a stride, at normal speed setting. I could hear the viper motor still going, without the vipers moving. Luckily,...
View ArticleRotten Sill
Has anyone here repaired a sill on a Berlingo? I'm about to start cutting and welding up the offside sill which has rotted due to a blocked drain hole and the last owner not using the jacking point!...
View ArticleM59 Heater Fan Control.
Hi Do any members have the correct wiring scheme drawings for the heater fan power supply and controls? The Haines manual is useless in this respect. My heater fan works spasmodically and is now left...
View ArticleDriver's window not working
My driver's side window decided to stop working, am not exactly sure when but it was fine the last time I used it a few days ago. Pressing the button has no effect at all, the passenger side is still...
View Article1.6 hdi turbo fail again advice please
bought another berlingo 1.6 hdi 92 hp model, but an hr in to my new purchase the turbo went, the garage had fitted a new turbo under warranty because the previous turbo had failed, so what are they...
View Articlekey fob????
i have a keys fob with lock/unlock buttons. am i correct in thinking my 2006 600d X spec never had central locking or is it currently not working?
View ArticleUndoing oil sump bolts.?
hi guys now removing sump bolts is usually a simple task, but these are so tight the Allen sockets are turning in the bolts, surely these bolts are no usually so tight... any suggestions ?
View ArticleClik here to view.
gearbox removal
hello im a newbie only registered today need a step by step guide to removing the gearbox on my berlingo 1.9 04 van any pics or advice will be gratefully accepted look online for free haynes manual...
View Articlegear leaver and rod needed
hi guys have anyone got a gear leaver and the long rod that goes to the 3 selector rods. had my 3 selector rods changed today and the long rod snapped on the bush. thanks.
View ArticleInjector/Cam Larder Studs 1.6 HDI
Hi all recently bought a 2008 1.6HDI as a run-around for supplies and to the tip while doing a basement conversion. Its done 150k To try and clear some white smoke on startup, I attempted to remove the...
View ArticleOverheat and antipollution?
I was 20 minutes into a 50 mile journey in my 2005 2.0HDi Multispace (M59). The multi function display beeped and the message "High Engine temperature" (or something which meant the same) came up. I...
View ArticleCustom PIDs for Torque App, 1.6HDi
Hi All, I bought a cheap ELM327 OBD-II adapter (https://www.amazon.co.uk/gp/product/B01A...UTF8&psc=1) for my car (Pug Partner 2007, 1.6HDi, no dpf/fap). I also got the Torque Pro app (android...
View Article2.0 Hdi starting (another one)
Recently bought a 03 2.0 Hdi. Thought when I bought it that it took longer to turn over before starting than my old 1.9D but, different car. Recent cold snap and didn't start for 4 days, not a peep,...
View Articleexhaust sheared at bottom of cat
1.4i 2005, fairly new lookin exhaust has sheared at weld at bottom of cat/downpipe. looks like downpipe should be supported under engine but it isnt. Hoping to get it welded in situ, anyone else had...
View ArticleRevving problem ?
Hello! New to the forum. Have a problem with the high idle. . Revving at 1100 at idle all the time even when warmed up. I've read that this could be the cold start mechanism. . Anyway the problem that...
View ArticleIdler Pulley
On my 1.6 HDI the aux belt has come off, looks like a idler pulley has come off, there is a metal shaft just underneath the power steering pump pulley, looks like the remains of a pulley, but I can't...
View Articletensioner pulley
Following on from my last question, I'm thinking about replacing the other pulleys, the pulley on the tensioner just looks like it's bolted on, is it OK to just replace the pulley, or should I go for...
View ArticleCentral Display sudden multiple issues
Dear all. My 56 plate (Partner Multi) has been fabulous and very little trouble. Still only on 85,000 on clock. The central display has recently started to pixelate and lose any ability to display...
View Articlestereo light stays on
I have a 2003 multispace and the stereo lights stay on even after ignition switched off which i think drains the battery after a few days,any ideas on solving the problem. cheers
View Article